Eastleigh & Southampton Sanding Equipment Hire

A: For a single project, hiring is often more cost-effective than buying a new, high-quality sander. A hire package can also save you money by including all the required accessories and sandpaper grits, so you don't overspend on supplies you won't use.

A: The right sander depends on the size of the area and the material you're working with.

• Drum sanders: Recommended for heavy-duty tasks, such as removing multiple layers of old finish from a large, solid wood floor.

• Orbital sanders: Easier to control and less likely to damage a surface. They are best for smoothing smaller areas, hallways, or for lighter refinishing jobs. You may also use them to create a fine finish on furniture.

• Edge sanders: Used in conjunction with a drum or orbital sander to reach corners and edges that the larger machine cannot.

• Belt sanders: For smoothing and leveling wood or for powerful stock removal on flat surfaces and stair treads.

A: Even modern sanding machines with dust bags are not entirely dust-free, and sanding can create a significant amount of dust.

• To manage dust, you should wear personal protective equipment, including a dust mask.

• Some hire companies offer optional Dust Control Units with HEPA filters that can be hired to minimize the dust that escapes into the air.

• You can also contain dust by sealing doorways with tape and sheeting before you begin.

• Preparation: Proper preparation is crucial for a successful and safe sanding project. Before starting, remove all furniture from the room. On wood floors, check for any nails or screws that are protruding and either remove or countersink them deeply to avoid damaging the equipment.

• Safety: Always wear proper safety gear, including a dust mask, gloves, and eye protection. For noisy machines, consider ear protection as well.

A: The time required depends on the size of the room and the condition of the floor.

• The average trade professional can usually sand a room of about 13 square meters in a day, which typically involves multiple passes with different grit levels.

• You will need to leave additional time for applying a new finish, which can add several hours to the project.

• After applying a finish, you can generally walk on the floor in socks after about 8 hours. However, the finish needs several days to fully cure before you can place heavy furniture on it again.